Ultra Thin 0.2mm Cold Rolled Carbon Steel Coil DC01 SPCC Tight Tolerance 600-1250mm Precision Components

The ultra thin cold rolled carbon steel coil with thickness from 0.2mm to 1.5mm is produced on high-speed tandem cold mills followed by annealing and skin pass rolling to achieve exceptional gauge accuracy and surface quality. This product is designed for precision stamping industries that manufacture electronic enclosures, connector shields, battery components, motor laminations and fine blanked parts where thickness variation directly affects dimensional accuracy and electrical performance. Zhengde controls the thickness tolerance to within plus or minus 0.02mm, which is significantly tighter than standard commercial tolerances, allowing progressive die stamping at high speeds with minimal adjustment. The coil is available in DC01 to EN 10130 or SPCC to JIS G3141, with hardness grades from soft annealed to 1/4 hard to suit different forming requirements. The bright finish surface is free of scratches, oil stains and edge burrs, and the slit edges are clean and parallel to guarantee smooth uncoiling in automated press lines. Each coil is inspected with online thickness gauges and pinhole detectors, and packaged with desiccant and vapor phase inhibitor paper to protect the sensitive surface during ocean shipment.

• Precision Gauge Control: Thickness tolerance within +/- 0.02mm ensures consistent part dimensions in high-speed progressive stamping
• Ultra Thin Range: Available from 0.2mm, ideal for electronics, laminations and precision enclosures
• Clean Bright Surface: Scratch-free finish with pinhole inspection meets cosmetic requirements for visible components
• Parallel Slit Edges: Burr-free slitting guarantees smooth feeding and reduces die wear in automated press lines
• Flexible Hardness: Soft to 1/4 hard tempers match forming and strength needs of different components
• Moisture Protected: VCI paper and desiccant packaging protect the sensitive surface during sea freight

Ultra thin cold rolled coils are used for battery cases, motor and transformer laminations, electronic shielding, connector terminals, office equipment frames, lighting reflectors, packaging closures and precision tubes where tight gauge control and clean surfaces are essential.

Coils are wrapped with VCI paper, plastic film and desiccant, with wooden pallets and steel straps for export. Mill certificates and inspection reports provided. Stock delivery 7-15 days; production orders 20-30 days.