P265GH Boiler Pressure Vessel Carbon Steel Coil EN 10028 3-30mm Thickness Heat Exchanger Storage Tank

The P265GH pressure vessel carbon steel coil is manufactured to EN 10028-2 for the construction of boilers, heat exchangers, pressure vessels and storage tanks operating at elevated temperatures. In addition to guaranteed room temperature mechanical properties, P265GH provides specified yield and tensile values at temperatures up to 400 degrees Celsius, which is the critical requirement for pressurized equipment in thermal and process industries. Zhengde controls the steel chemistry with tight phosphorus and sulfur limits and applies normalizing or controlled rolling to achieve a fine-grained microstructure that delivers stable high-temperature strength and good creep resistance. The coil is suitable for both hot forming and cold forming followed by heat treatment, and it welds reliably with standard low-alloy consumables. Thicknesses from 3mm to 30mm and widths up to 2500mm are available, with ultrasonic testing offered for critical applications. Each coil is supplied with full EN 10204 3.1 documentation including chemical composition, tensile properties, impact values and high-temperature yield data, enabling pressure vessel fabricators to complete their design documentation without additional testing.

• Elevated Temperature Rated: Guaranteed mechanical properties up to 400 deg C make the grade suitable for pressurized hot service
• EN 10028-2 Certified: Full compliance with European pressure vessel steel standard with 3.1 inspection certificates
• Fine Grain Microstructure: Normalized or controlled rolled structure delivers stable strength and toughness in thick sections
• Excellent Weldability: Low carbon equivalent and tight impurity control prevent cracking in fusion welded joints
• Ultrasonic Tested Option: Full volumetric UT available for critical pressure retaining applications
• Complete Documentation: Chemical, tensile, impact and high-temperature data provided with every shipment

P265GH coils are used for boiler drums, steam generators, heat exchanger shells and tubesheets, feed water tanks, air receivers, LPG storage tanks, process columns and piping systems in power plants, refineries, chemical plants and food processing facilities requiring certified pressure vessel materials.

Pressure vessel grade coils receive extra anti-rust protection and careful handling to protect edge and surface quality. Full EN 10204 3.1 documentation, ultrasonic testing and third-party inspection by TUV or BV are available on request. Delivery 7-15 days stock, 20-30 days production.