| Technique | Hot Rolled |
|---|---|
| Application | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
| Special Use | Cutting Tools, Measuring Tools, Cutters In Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel |
| Stock | Stock |
| Material | A36 /S235 /S275jr /S355jr DC01//Ss400/SA283 Etc... |
| Model NO. | SGCD1 SGCD2 SGCD3 |
|---|---|
| Application | Container Plate |
| Edge | Slit Edge |
| Stock | Stock |
| Thickness | 1mm-30mm |
| Model NO. | PPGI Coils |
|---|---|
| Application | PPGI |
| Edge | Slit Edge |
| Stock | Stock |
| Material | PPGI Coils |
| Model NO. | PPGI Coils |
|---|---|
| Application | PPGI |
| Edge | Slit Edge |
| Stock | Stock |
| Material | PPGI Coils |
| Model NO. | ZD-PPGI |
|---|---|
| Application | PPGI |
| Edge | Slit Edge |
| Stock | Stock |
| Material | Dx51d,Dx52D,Dx53D,Dx54D,S250gd,S350gd,S550gd |
| Application | PPGI |
|---|---|
| Edge | Slit Edge |
| Stock | Stock |
| Material | Dx51d,Dx52D,Dx53D,Dx54D,S250gd,S350gd,S550gd |
| Thickness | 1mm-30mm |
| Model NO. | ZD-hrc |
|---|---|
| Application | Boiler Plate |
| Edge | Slit Edge |
| Stock | Stock |
| Material | C10/C45e4/1008/1020/1016/1572 |
| Pencil Hardness | Not Less Than HB |
|---|---|
| Total Weight Of Plating Both Sides (Outside/Inside) | 150g/ (75/75 Or 85/65) |
| Elongation After Break | More Than 20% |
| Label Thickness | ≥0.45mm |
| Tensile Strength | 270-500MPA |
| Model NO. | ZD-GC01 |
|---|---|
| Application | Container Plate |
| Edge | Slit Edge |
| Stock | Stock |
| Material | C10/C45e4/1008/1020/1016/1572 |
| Model NO. | ZD-GC03 |
|---|---|
| Application | Container Plate |
| Edge | Slit Edge |
| Stock | Stock |
| Material | C10/C45e4/1008/1020/1016/1572 |
