| Model NO. | ZD-HRC 25T1250 |
|---|---|
| Application | Construction, Machine,Petroleum, Metallurgy, Ship |
| Edge | Slit Edge |
| Stock | Stock |
| Material | A36 /S235 /S275jr /S355jr DC01//Ss400/SA283 Etc... |
| Application | Construction, Machine,Petroleum, Metallurgy, Ship |
|---|---|
| Edge | Slit Edge |
| Stock | Stock |
| Material | A36 /S235 /S275jr /S355jr DC01//Ss400/SA283 Etc... |
| Thickness | 1mm-30mm |
| Model NO. | ZD-HR345 |
|---|---|
| Application | Construction, Machine,Petroleum, Metallurgy, Ship |
| Edge | Slit Edge |
| Stock | Stock |
| Material | A36 /S235 /S275jr /S355jr DC01//Ss400/SA283 Etc... |
| Packaging Details | Customer settings |
|---|---|
| Delivery Time | 10days |
| Payment Terms | T/T |
| Supply Ability | 100+ton+10days |
| Place of Origin | CHNIA |
| Model NO. | ZD-PPC01 |
|---|---|
| Application | PPGI |
| Edge | Slit Edge |
| Stock | Stock |
| Material | C10/C45e4/1008/1020/1016/1572 |
| Technique | Hot Rolled |
|---|---|
| Application | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
| Special Use | Cutting Tools, Measuring Tools, Cutters In Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel |
| Stock | Stock |
| Material | A36 /S235 /S275jr /S355jr DC01//Ss400/SA283 Etc... |
| Technique | Hot Rolled |
|---|---|
| Application | Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate |
| Special Use | Cutting Tools, Measuring Tools, Cutters In Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel |
| Stock | Stock |
| Material | A36 /S235 /S275jr /S355jr DC01//Ss400/SA283 Etc... |
| Packaging Details | Customer settings |
|---|---|
| Delivery Time | 10days |
| Payment Terms | T/T |
| Supply Ability | 100+ton+10days |
| Place of Origin | CHNIA |
| Model NO. | SGCD1 SGCD2 SGCD3 |
|---|---|
| Application | Container Plate |
| Edge | Slit Edge |
| Stock | Stock |
| Thickness | 1mm-30mm |
| Pencil Hardness | Not Less Than HB |
|---|---|
| Total Weight Of Plating Both Sides (Outside/Inside) | 150g/ (75/75 Or 85/65) |
| Elongation After Break | More Than 20% |
| Label Thickness | ≥0.45mm |
| Tensile Strength | 270-500MPA |
