| Model NO. | ZD-DICP6089 |
|---|---|
| Usage | Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose |
| Section Shape | Round |
| Custom Made | Yes |
| Custom Cycle | 7-15 Days |
| Usage | Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose |
|---|---|
| Section Shape | Round |
| Custom Made | Yes |
| Custom Cycle | 7-15 Days |
| Production Standards | ASTM/JIS/AISI/DIN/BS/En/GB |
| Model NO. | ZD-DUPIPE |
|---|---|
| Usage | Pipeline Transport, Boiler Pipe, Hydraulic/Automobile Pipe, Oil/Gas Drilling, Food/Beverage/Dairy Products, Machinery Industry, Chemical Industry, Mining, Construction & Decoration, Special Purpose |
| Section Shape | Round |
| Custom Made | Yes |
| Custom Cycle | 7-15 Days |
| Model NO. | ZD-HRR |
|---|---|
| Ductility Class | Low/ Normal/ E- Seismic (Earthquake)Ductility |
| Production Standards | ASTM/JIS/AISI/DIN/BS/En/GB |
| Payment Term | 30%T/T Advance + 70% Balance |
| Alloy Or Not | Low Alloy |
| Model NO. | ZD-HRR |
|---|---|
| Ductility Class | Low/ Normal/ E- Seismic (Earthquake)Ductility |
| Production Standards | ASTM/JIS/AISI/DIN/BS/En/GB |
| Payment Term | 30%T/T Advance + 70% Balance |
| Alloy Or Not | Low Alloy |
| Model NO. | ZD-SSCOIL |
|---|---|
| Material | 201/202/304/309/309S/310/310S/304/304L/316/316L |
| Thickness | 0.1mm-13mm |
| Width | 10mm-3000mm |
| Roll Weight | 0.5t-25t |
| Model NO. | ASTM A283GRC A284GRB A306GR55 Q235 |
|---|---|
| Stock | Stock |
| Material | C10/C45e4/1008/1020/1016/1572 |
| Thickness | 1mm-30mm |
| Width | 10mm-3000mm |
| Model NO. | ZD-HRC |
|---|---|
| Application | Ship Plate, Boiler Plate, Container Plate |
| Edge | Mill Edge, Slit Edge |
| Stock | Stock |
| Material | C10/C45e4/1008/1020/1016/1572 |
| Pencil Hardness | Not Less Than HB |
|---|---|
| Total Weight Of Plating Both Sides (Outside/Inside) | 150g/ (75/75 Or 85/65) |
| Elongation After Break | More Than 20% |
| Label Thickness | ≥0.45mm |
| Tensile Strength | 270-500MPA |
| American Standard/European Standard | ASTM A792M |
|---|---|
| PE Coating Structure Standard (μm) | 2/1 |
| Pencil Hardness | Not Less Than HB |
| Elongation After Break | More Than 20% |
| Impact Energy | Not Less Than 9J |
